Bonjour, je continue dans le changement de configuration et je met à la vente ma platine Project RPM 5.1.
Produit maintenant arrêté, qui m'a procuré beaucoup de plaisir, étant au début de mon expérience Hifi, j'achète et monte en gamme et revends.
La cellule a très peu servit car j'ai vite acheté et monté une cellule MC. Elle a donc reposé dans une boite à l'abri. Platine achetée en Novembre 2016 chez Hifi sound en Allemagne, autre cellule (non en vente) achetée fin février 2017, donc cellule quasiment neuve.
j'ai ajouté un capot de protection (75 euros), je le fournis avec
j'en suis donc le premier et seul propriétaire, platine comme neuve n'ayant pas bougée depuis son achat
prix de vente 450 euros, carton et tous les accessoires d'origine, je peux envoyer la platine, mais je n'ai pas de moyen aisé d'envoyer le capot.
platine présent en ile de France sud (prés de St rémy les chevreuses)
Manual turntable with carbon tone-arm, Ortofon 2M Silver MM-cartridge
Turntable
- Chassis piano-lacquered dark grey
- A quiet running AC motor with a two-step pulley drives the hub and platter via a flat-ground belt.
- The medium density fibre plinth stands on three height-adjustable rubber-damped aluminium cones.
- he motor is decoupled from the plinth to reduce vibration transmission.
- The resonance-optimised platter is a sandwich construction utilising the hub, an medium density fibre platter, a cork mat (a standard felt mat is supplied also) and a screw-down record clamp.
- The platter's low-tolerance chrome-plated stainless-steel axle runs on a bearing plate in a sintered bronze bearing housing.
- Central metal block optimises centre of gravity and damps main bearing.
- Connection to the phono input of the amplifier can be made with connecting cables of your taste through the gold plated phono sockets and earth screw. A standard cable is provide.
Tonearm 9cc
- The turntable is supplied with Ortofon 2M silver MM-cartridge fitted.
- The headshell and armtube are fashioned from a single piece of carbon-fibre.
- Conical armtube avoids standing wave reflections.
- Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.
- Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances.
- Design of counterweight effectively counteracts unwanted resonances.
- The counterweight supplied is suitable for cartridges weighing between 6 - 10g. Alternative counterweights for cartridges weighing between 11 - 15g, 8 - 11g or 5 - 8g are available as an accessory part.
- Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records.
- Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
- Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
- Silicone-damped armlift can be adjusted to suit working height of the arm.
- The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets.
- Quartz-controlled speed, switchable between 33rpm and 45rpm
- Microprocessor-controlled
- For superior smoothness of drive motor
Technical data
- Ortofon 2M Silver
- Amplifier connection MM-input
- Nominal speeds 33 / 45 / 78 r.p.m. (78 optional)
- Dust cover Pro-Ject Cover it optional
- Record clamp yes
- RCA phono sockets yes
- Rubber-damped aluminium cones yes
Tonearm Pro-Ject 9cc
- Tonearm with fibre armtube and sapphire thrust-pads yes
- Effective tonearm length 9" (230mm)
- Effective tonearm mass 8,5g
- Overhang 18mm
- Supplied counterweight cartridge weight 6 - 10g
- Optional counterweights cartridge weights 11 - 15g, 8 - 11g, 5 - 8g
- Downforce range 10 - 30mN
- Speed variance ±0,5 %
- Wow and flutter ±0,08 %
- Signal to noise -70dB
- Platter weight/diameter 1,75kg/300mm
General Data
- Power supply type Mains-fed outboard power supply 220 - 240V, 50 cycles or 100 - 110V, 60 cycles
- Output voltage 16V/500mA AC
- Power consumption 2W
- Dimension (W x H x D) 371 x 145 x 300mm
- Weight 6,5kg
Vous devez être membre de Club Hifi pour ajouter des commentaires !
Réponses
Vendue